Ethernet Connection Speed; Restore Network Factory Settings - Xerox 6100BD - Phaser Color Laser Printer System Manual

Ethernet connection speed

Restore network factory settings

System Guide
In Network Configuration, using the Connections tab, the
administrator can select the speed of the Ethernet. The
default is set to automatic and the software/NIC card
automatically detects and transmits at the highest speed
available. However, the interface also offers 10 mb/sec, 100
mb/sec and 1000 mb/sec as the situation requires.
The need to set a specific speed may occur if a switch is set
to a particular speed and does not support automatic
negotiation. Under these conditions, the full DocuSP
controller may need to be set to the same speed as the
switch.
With the addition of several interface options as well as user
settings, the administrator may want to restore factory
settings. The interface provides a [Restore Defaults] button in
Network Configuration that permits the admininstrator to
restore all settings or to restore factory settings for only those
of specific protocols.
Gateway and Network Configuration
1-13