Stacking Order; Mixed Stacking; Additional Finishing Information - Xerox 6100BD - Phaser Color Laser Printer System Manual

Finishing

Stacking order

Mixed stacking

Additional finishing information

5-6
The user is able to specify the Output Set Stacking Order by
the combination of Output Order (1 to N or N to 1) and the
Output Delivery (Face Up/Face Down) selections.
These options can be set either at the Queue property level
or at the Job property level as part of the job ticket output
option.
Mixed stacking allows all completed jobs with different
finishing to accumulate in the stacker until it is full or until the
operator empties it.
The types of finishing that can be mixed include stitching,
binding, and unfinished. The mixed stack can also include
banner pages. The stacker can hold between 12 and 18
subsets of different types of finishing in the stacker before
unloading.
Mixed stacking is enabled upon installation but can be
disabled if you choose to do so. If you wish to have it enabled
at a later date, a Xerox Service Representative must assist
you.
The DocuSP is unable to dual staple 3-hole punched stock. If
dual staple is selected when using pre-drilled paper, improper
registration will occur. Select to single staple the job, or print
on non-drilled stock and manually punch the holes after
finishing of dual staple is complete.
System Guide