Color Systems; Settings For Enhanced Color Output; Color Job Processing Efficiencies; Time Used To Generate The Pdl - Xerox 6100BD - Phaser Color Laser Printer System Manual

Hints and Tips

Color Systems

Settings for enhanced color output

Color job processing efficiencies

Time used to generate the PDL

9-2
3. Edit /usr/dt/app-defaults/C/Dtwm.
4. Change the following line to True:
Dtwm*useFrontPanel:False
5. Reboot the system. The CDE front panel will return.
The DocuSP software takes advantage of new laser
technology and other hardware advances.
Set the 200 Line on Queue and calibrate. The 200 Line
produces dramatically better results. Also the level of noise in
the new 200 Line is negligible and produces benchmark
results.
Set SWOP Plus Output for CMYK. This simulates the SWOP
press while taking advantage of the digital press gamut.
An additional way to improve color output is to use the profile
overrides in Job Properties.
The time required to process a job can depend primarily on
four variables:
• Time for a client workstation to generate the Page
Description Language (PDL, i.e. PostScript, HP-PCL,
TIFF, etc.).
• Time to transfer the job PDL across the net and be
marked as received by the DocuSP.
• Time required to RIP the PDL to produce the bit maps that
the print engine can use.
• Time required to write the RIPped bit maps to the print
engine and generate paper.
This variable is strongly influenced by the speed of the client
workstation, the print driver being used by the application,
and the complexity of the pages to be printed.
System Guide