Xerox 6100BD - Phaser Color Laser Printer System Manual page 139

Table 0-2. Utilities for DocuSP Software
Utility
/opt/XRXnps/bin/setpdfsuppresscsa
/opt/XRXnps/bin/setpantonetoprocess
/opt/XRXnps/bin/setpdfbinarycheck
/opt/XRXnps/bin/setsweepdither
/opt/XRXnps/bin/setonesideduplexat
devicedeact
/opt/XRXnps/bin/setobjectonwhitetagging
System Guide
Change Description
When PDF files are created with
Adobe Acrobat Distiller 5.0 and above,
the output may have color
management applied by default. This
results in text printing as halftoned
images. DocuSP is rendering the file
correctly, however, this is often not a
desired output.
This script determines how pantone
calls are handled by DocuSP.
Enables/Disables PDF binary check.
System default is enabled. If you
disable it, PDF performance may be
impacted.
Enables/Disables sweep dither level.
Customer jobs that contain Sweeps
that are created with PS Level 3 Printer
Driver using the SmoothSHading
PostScript operator may exhibit
Contours when printed on DocuSP.
Default is on and set to 1.
This utility command allows a
combination of duplex and simplex
subset finishing.
Disabling the utility causes the
DocuSP PostScript decomposer to
ignore the commands to eject a duplex
page as a one-sided page. The
entered job prins in duplex mode. This
is the current default behavior of the
decomposer.
Enabling the utility, the decomposer
prints in simplex when it encounters
the appropriate PostScript command
that deactivates duplex mode. The
resulting output is a combination of
duplex and simplex pages.
Enables/Disables tagging of stroke
objects on a white background.
Hints and Tips
Focus
Black and
white
Color
Both
Color
Both
Color
9-11