Main Drive Assembly Removal - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Installation note: The fan has an orientation marking (D). Be sure to install the fan with the arrow pointing up.

Main drive assembly removal

Remove the system board and inner shield. See
1.
page 4-77.
Remove the screw securing the gear guard (A).
2.
Remove the power take off shaft and spring. See
3.
page 4-73.
Remove the developer drive assembly. See
4.
Service Manual
4-58
"System board and inner shield removal" on
"Power takeoff shaft and spring removal" on
"Developer drive assembly removal" on page 4-25.