Fuser Exit Sensor Flag And Spring Removal - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Fuser exit sensor flag and spring removal

Remove the fuser exit sensor. See
1.
Note the position of the spring (A) in relation to the flag (B).
2.
Carefully ease the right arm (C) until the fuser exit sensor cover releases the flag and spring.
3.
Spring replacement
Place the spring on the left pin (A).
1.
Set the tang (B) on the flag.
2.
"Fuser exit sensor removal" on page 4-29.
Repair information
4-31