Table of Contents
Advertisement
User attendance messages (continued)
Error
Sub
Primary message
code
code
56
.xx
Standard Parallel Port
Disabled
56
.xx
Parallel Port x Disabled
57
.xx
Configuration Change
58
.xx
Too Many Trays
Attached
58
.xx
Too Many Disks
Installed
59
.xx
Incompatible Output
Bin x
59
.xx
Incompatible Envelope
Feeder
Description/action
This error is displayed when data is sent to the printer across the parallel
port, but the parallel port has been disabled. Once this message is
displayed, reporting of further errors is suppressed until the menus are
entered, or the printer is reset. The following actions may be taken:
• Press
to clear the message. The printer discards any data received
on the parallel port.
• Press
until Busy/Waiting appears. The following are available:
- Reset Printer
- Reset Active Bin
This error is displayed when data is sent to the printer across the parallel
port, but the parallel port indicated has been disabled. Once this message is
displayed, reporting of further errors is suppressed until the menus are
entered, or the printer is reset. The following actions may be taken:
• Press
to clear the message. The printer discards any data received
on the parallel port.
• Press
until Busy/Waiting appears. The following are available:
- Reset Printer
- Reset Active Bin
The printer has attempted to restore the Print and Hold jobs from the disk
and found that some or all of the jobs could not be restored. The printer
could not restore jobs from the disk because the configuration of the printer
has changed. This message alternates with the secondary message, Held
jobs may not be restored.
Some configuration changes that may cause this condition are:
• Code version change
• Paper handling option is removed
• Disk has been moved to a different model printer.
Press
to clear the message. Some of the Print and Hold jobs stored on
the disk will not be restored. They remain on the disk, but cannot be
accessed.
This error code displays when too many input trays are attached to the
printer.
This error displays when too many disks are attached to the printer.
An incompatible output bin is installed. For Output Bin x, x=1, 2, or 3.
Remove the incompatible output bin and press
Note: If the user installed the incompatible device to satisfy a Check Device
Connections/reattach message, the user should reinstall an associated
compatible option or hot unplug the option.
An incompatible envelope feeder is installed.
Remove the incompatible feeder and press
Note: If the user installed the incompatible device to satisfy a Check Device
Connections/reattach message, the user should reinstall an associated
compatible option or hot unplug the option.
to clear the message.
to clear the message.
Diagnostic information
2-41
Advertisement
Table of Contents
