Paper bin full sensor flag removal
Remove the left door. See
1.
Remove the redrive cap. See
2.
Remove the fuser wiper cover assembly. See
3.
Remove the mounting screws (A) from the left side.
4.
Lift the left corner of the laser cover assembly cover to access the flag.
5.
Use your thumb to bend the paper full flag assembly slightly to unlatch it from the mounting bracket.
6.
"Left door removal" on page
"Redrive assembly removal" on page
"Fuser wiper cover assembly removal" on page 4-5
A
4-7.
4-75.
Repair information
4-71