Table of Contents
Advertisement
Factory Defaults
This setting enables a user to restore all the printer settings to the original factory settings. Selections are
Restore Base and Restore Network. Network does not appear unless you have a network printer. The
following settings are not changed:
Display language
•
Settings in the NETWORK/PORTS MENU group.
•
Energy Conserve
This menu controls what values appear on the Power Saver menu. If Off is selected in Energy Conserve menu,
then Disabled appears in the Power Saver menu and Power Saver can be turned off. If On is set in Energy
Conserve, the Power Saver feature cannot be disabled.
EVENT LOG
The event log provides a history of printer errors. The event log can only be printed in CONFIG MENU.
Additional options are available in DIAGNOSTICS. See
To print the event log:
Select Print Log from EVENT LOG.
1.
Press Back (
2.
Note: An event log printed from the CONFIG MENU will not contain debug information or secondary codes for
900 service errors. However, the event log printed from DIAGNOSTICS mode does include this information.
Paper Prompts
When a tray is out of the indicated paper size, a prompt is sent to the user to load paper in a tray. This setting
controls the tray the user is directed to fill. Selections are Auto (default), MP Feeder, and Manual Paper.
Env Prompts
This setting controls the tray the user is directed to refill when specific envelope size is out. The selections are
Auto (default), MP Feeder, and Manual Env.
Jobs On Disk
If the hard disk is installed, Jobs On Disk allows the user to delete buffered jobs saved on the disk. The values
are Delete and Do Not Delete.
Disk Encryption
If a hard disk is installed, Disk Encryption selects whether the data on the disk is encrypted or not. The values
are Disable and Enable.
Warning: Whenever this value is changed, data on the hard disk is erased.
Service Manual
3-28
)
)
or Stop (
to return to EVENT LOG.
"EVENT LOG" on page
3-23.
Advertisement
Table of Contents
