Fixing Pressure Roller; Preparation For Removing The Fixing Pressure Roller; Removing The Fixing Pressure Roller - Canon LBP6000 Series Service Manual

- Be sure not to touch the surface [1] of the Fixing Film Unit.
- Do not disassemble the Fixing Film Unit to prevent occurrence of
functionality failure.
1) Disconnect the connector [1], and free the harness [3] from the Harness
Guide [2].
[2] [3]
2) Turn the Fixing Assembly [1] in the direction of the arrow [A] followed
by the arrow [B].
[1]
3) Remove the Fixing Upper Guide [1].
- 2 Screws [2]
4) Remove the 2 Pressure Plates [1] (right and left).
- 2 Springs [2]
- 2 Pressure Arms [3]
[1]
[1]
F-3-124
[A]
[B]
F-3-125
[2]
[1]
[1]
F-3-126
[3]
[1]
[2]
5) Remove the Fixing Film Unit [1].

3.5.3 Fixing Pressure Roller

3.5.3.1 Preparation for Removing the Fixing Pressure
Roller
LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-3)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Reference[Removing the Left Cov-
er]
3) Removing the Right Cover (page 3-2)Reference[Removing the Right
Cover]
4) Removing the Rear Cover (page 3-1)Reference[Removing the Rear
Cover]
5) Removing the Main Controller PCB (page 3-17)Reference[Removing
the Main Controller PCB]
6) Removing the Fixing Assembly (page 3-34)Reference[Removing the
Fixing Assembly]
7) Removing the Fixing Film Unit (page 3-38)Reference[Removing the
Fixing Film Unit]

3.5.3.2 Removing the Fixing Pressure Roller

LBP3100 / LBP3010B
1) Remove the fixing pressure roller [1].
Do not touch the surface [1] of the fixing pressure roller.
Chapter 3
[3]
[1]
F-3-127
[1]
F-3-128
[1]
[2]
0019-4362
0019-4364
3-39