3.4
Foreword
The Frequency Monitoring function allows you to listen to the Standby
Getting
frequency in the Com radio, while monitoring the Active frequency for activity.
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Com Standby
Editing Window
Map
Traffic
Terrain
Frequency
Weather
Monitor Key
Nearest
Music
Utilities
System
NOTE: The Com radio Monitoring function is different than the Monitor
function of the Audio Panel.
Messages
Symbols
Appendix
3-14
Index
Com Frequency Monitoring
1. Touch the Monitor key to listen to the standby frequency.
A small "MON" annunciation is displayed to the right of the
Standby frequency. A green bar will show on the Monitor
key. When the Active frequency receives a signal, the unit will
switch automatically to the Active frequency and then switch
back to the standby frequency when activity ceases.
Frequency Monitor
Annunciation
Figure 3-19 Com Frequency Monitoring
2. The Monitor function is deactivated when you touch the
Monitor key again and the green bar is extinguished.
Garmin GTN 725/750 Pilot's Guide
Standby Frequency
Clear Key
Frequency
Transfer
(Flip-Flop)
Key
190-01007-03 Rev. B