Ground; Direct-To; Altitude Reporting; Vfr - Garmin GTN 750 Pilot's Manual

2.1.4

Ground

1. Touch the Ground key to place the transponder into Ground
mode. Mode S replies will be allowed in Ground mode.
Transponder Operation "Ground" Mode
Figure 2-5 Transponder Mode "Ground" Indication
2.1.5 On
1. Touch the On key for Mode A operation. The transponder is
"On" and will transmit its squawk code when interrogated.
Transponder Operation "ON" Mode
Figure 2-6 Transponder Mode "ON" Indication
2.1.6

Altitude Reporting

1. Touch the Altitude Reporting key for Mode C operation.
2. The transponder will be "On" and will transmit its squawk
code and altitude when interrogated. An "ALT" annunciation
will appear when the squawk code is transmitted.
2.1.7

VFR

Touch the VFR key to set the VFR squawk code (1200).
VFR (1200) Transponder Squawk Code
190-01007-03 Rev. B
Active XPDR and IDENT Enabled
Figure 2-7 Transponder VFR Squawk Code
Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL

Direct-To

Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
2-3
Index