3.4
Foreword
The Frequency Monitoring function allows you to listen to the Standby
Getting
frequency in the Com radio, while monitoring the Active frequency for activity.
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Frequency Transfer
(Flip-Flop) Key
Wpt Info
Map
Traffic
Terrain
Weather
NOTE: The Com radio Monitoring function is different than the Monitor
Nearest
function of the Audio Panel.
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
3-12
Com Frequency Monitoring
1. Touch the MON key to listen to the standby frequency. A small
"MON" annunciation is displayed to the right of the Standby
frequency. A green bar will show on the MON key. When
the Active frequency receives a signal, the unit will switch
automatically to the Active frequency and then switch back
to the standby frequency when activity ceases.
Frequency
Monitor Key
Figure 3-21 Com Frequency Monitoring
2. The Monitor function is deactivated when you touch the MON
key again and the green bar is extinguished.
Garmin GTN 625/635/650 Pilot's Guide
Com Standby
Frequency Monitor
Editing Window
Annunciation
190-01004-03 Rev. F