Point-To-Point Mode - Garmin GTN 750 Pilot's Manual

15.5.1
Foreword
The Fuel Planning Point-to-Point mode shows fuel calculations between two
selected points: either two waypoints from the database or from your present
Getting
Started
position to a selected waypoint.
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Touch To Use
Wpt Info
Present Position
As Departure
Map
Touch To Select
Ext Sensor Data
Traffic
Touch To Select
Fuel on Board
Terrain
Touch To Select
Fuel Flow
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
15-22
Index

Point-To-Point Mode

1. While viewing the Utilities page, touch the Fuel Planning
key.
2. Touch the Mode key to toggle to Point-to-Point.
3. Touch the P.POS key to toggle between using your present
position as the From waypoint when selected or a waypoint
selected from the database when P.POS is deselected. If P.POS
is selected, the Lat/Lon of the present position will be shown
in the From position.
Lat/Lon Of Present
Point
Figure 15-25 Utility Trip Planning Page (Point-To-Point Mode)
Garmin GTN 725/750 Pilot's Guide
Touch To Select
Position Arrival Waypoint
Touch To Select
P-to-P or Flight
Plan Mode
Touch To Select
Expected Average
Ground Speed
Fuel Statistics
190-01007-03 Rev. B