Direct-To Map Waypoint - Garmin GTN 750 Pilot's Manual

5.5

direct-To Map Waypoint

A Direct-To course may be set to any waypoint selected on the Map page. The
waypoint is selected by touching an item such as an airport, VOR, or NDB or
any other location. Touching the map page at any place not having an existing
location name will create a waypoint with the name "MAPWPT." Touching the
Direct-To key will automatically insert the selected waypoint as the Direct-To
waypoint. The MAPWPT will be saved as a User Waypoint.
1. On the Map page, touch the map at the location intended to
be the Direct-To waypoint.
2. Press the Direct-To key on the right side of the unit.
Waypoint Tab
Direct-To
Waypoint Name
Touch To
Remove The
Direct-To Course
Figure 5-9 Touch the Map to Create a MAPWPT as the Direct-To Course Destination
3. Touch the Activate key or press the small right knob to
activate the selection.
190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide
Direct-To Waypoint
Map Symbol
Touch To
Activate The
Direct-To Course
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
5-7
Index