Auto-Tuning The Com Frequency - Garmin G1000 Pilot's Manual

AUDIO PANEL AND CNS

AUTO-TUNING THE COM FREQUENCY

COM frequencies can be automatically tuned from the following:
• Nearest Airports Window (PFD)
• WPT – Airport Information Page
• NRST – Nearest Airports Page
AUTO-TUNING FROM THE PFD
COM frequencies for the nearest airports can be automatically tuned from the Nearest Airports Window on
the PFD. When the desired frequency is entered, it becomes a standby frequency. Pressing the Frequency
Transfer Key places this frequency into the COM Active Frequency Field.
Auto-tuning a COM frequency for a nearby airport from the PFD:
1) Press the NRST Softkey on the PFD to open the Nearest Airports Window. A list of 25 nearest airport identifiers
and COM frequencies is displayed.
2) Turn the FMS Knob to scroll through the list and highlight the desired COM frequency.
3) Press the ENT Key to load the COM frequency into the COM Standby Tuning Box.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
4-10
Figure 4-10 Nearest Airports Window (PFD)
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
• NRST – Nearest (ARTCC, FSS, WX) Frequencies
Page
• NRST – Nearest Airspaces Page
Selecting the NRST
Softkey Opens the
Nearest Airports
Window
190-00592-02 Rev. A