Garmin GTN 750 Pilot's Manual page 384

Pilot's guide

Hide thumbs Also See for GTN 750:

Table of Contents

There are several reference datums that waypoints can be surveyed against.

TSO-C146 normally requires that all waypoints be referenced to the WGS84

datum, but allows for navigation to waypoints that are not referenced to the

WGS84 datum so long as the pilot is notified. Certain waypoints in the navigation

database are not referenced to the WGS84 datum, or their reference datum is

unknown. If this is the case, this message is displayed. Garmin cannot determine

exactly how close the non-WGS84 referenced waypoint will be to the WGS84

datum that the GTN uses. Typically, the distance is within two nautical miles. The

majority of non-WGS84 waypoints are located outside of the United States.

Garmin GTN 725/750 Pilot's Guide

190-01007-03 Rev. B

Show Quick Links

Table of Contents