Selecting A Departure - Garmin GTN 750 Pilot's Manual

6.2
Foreword
A Departure Procedure (DP) is loaded at the departure airport in the flight
Getting
plan. Only one departure can be loaded at a time in a flight plan. If a departure
Started
is loaded when another departure is already in the active flight plan, the new
Audio &
departure replaces the previous departure. The route is defined by selection of a
Xpdr Ctrl
departure, the transition waypoint, and a runway.
Com/Nav
NOTE: Vector-only departures are not available in the Procedures database
as the GTN 7XX cannot provide navigational guidance on vectored legs.
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Desired Departure
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
6-4
Index

Selecting a departure

1. Touch the PROC key on the Home page and then touch the
Departure key to display the Departure list.
2. If necessary, touch the Airport key and enter the departure
airport. Touch the key for the desired Departure.
Touch To Select
Figure 6-2 List for Selecting a Departure
Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. B