Obs - Garmin GTN 750 Pilot's Manual

9.5
Foreword
The OBS key is used to select manual or automatic sequencing of waypoints.
Getting
Touching this key selects OBS mode, which retains the current "active to"
Started
waypoint as your navigation reference even after passing the waypoint (i.e.,
Audio &
Xpdr Ctrl
prevents sequencing to the next waypoint). Touching the OBS key again returns
to normal operation, with automatic sequencing of waypoints. Whenever OBS
Com/Nav
mode is selected, you may set the desired course To/From a waypoint using the
pop-up window on the GTN 7XX or with the external OBS selector on your
FPL
HSI or CDI. For leg types that do not support OBS, this key will be shown as
a SUSP key. This key will then also function as an Unsuspend key for legs that
Direct-To
auto-suspend, such as holds, missed approaches, etc.
Proc
NOTE: In dual GTN installations with crossfill on, the OBS course will only
be updated real time on the GTN that is receiving the new OBS course. The
Charts
course will be transferred to the other GTN when OBS is exited.
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
9-34
Index

OBS

1. Touch the OBS key to enable the OBS function.
2. Enter the desired OBS heading using the keypad and touch
Enter.
3. The OBS heading will be shown in the flight plan annunciation
above the CDI in the lower portion of the display. The OBS
function annunciation will show.
Figure 9-39 OBS Course Selection
Garmin GTN 725/750 Pilot's Guide
Next FPL Leg
Runway Extension
Destination Wpt
Ownship Position
Active FPL Leg
OBS Heading
Touch the OBS Key To
Enable OBS Function
OBS Function
Annunciation
190-01007-03 Rev. B