2. Touch the Menu key to setup the StormScope display.
360º View
Selected
3. Touch the 360° or Arc to select the display view.
12.2.2
Clearing the StormScope
Routinely clearing the StormScope Page of all discharge points is a good
way to determine if a storm is building or dissipating. In a building storm
discharge points reappear faster and in larger numbers. In a dissipating storm
discharge points appear slower and in smaller numbers.
1. While viewing the Weather StormScope page, touch the Clear
Strikes key to clear lightning strikes.
2. Lightning strikes will be cleared from the display and the Rate
value will be reset.
190-01007-03 Rev. B
Figure 12-41 StormScope Menu
Garmin GTN 725/750 Pilot's Guide
Lightning
Display Mode
- Strike Selected
Page
®
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
12-29
Index