Garmin GTN 750 Pilot's Manual page 381

Message
SET COURSE -
Set course on CDI/
HSI to [current
DTK].
STEEP TURN -
Aircraft may
overshoot course
during turn.
STORMSCOPE -
StormScope is
inoperative or
connection to GTN
is lost.
STORMSCOPE -
Invalid heading
received from
StormScope.
TAWS AUDIO
INHIBITED -
TAWS audio inhibit
input is stuck.
190-01007-03 Rev. B
Description
The selected course
on the CDI/HSI does
not match the current
desired track.
Flight plan contains an
acute course change
ahead which will
require a bank in excess
of normal to follow the
guidance. If coupled
to the autopilot, the
autopilot may not be
able to execute the
steep turn needed
to follow the course
guidance.
The GTN is configured
for a WX-500
StormScope but is not
receiving data from it.
The WX-500
StormScope reports
that it has an invalid
heading source.
The TAWS Audio
Inhibit discrete input
has been active for
at least 30 seconds.
This input is active in
all installations. TAWS
audio may be heard at
the same time as other
audio alerts.
Garmin GTN 725/750 Pilot's Guide
Action
Set the CDI/HIS selected course to
the current desired track.
No action is necessary; message is
informational only. If desired, slow
the aircraft to shallow the turn.
Contact dealer for service.
GTN StormScope data is correct
and may be used. Contact dealer
for service.
Contact dealer for service.
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
17-15
Index