Changing The Stormscope ® Display View; Changing The Storm Data Display Range - Garmin GTN 750 Pilot's Manual

12.2.3
Foreword
The Lightning Page displays either a 360° or a 120° viewing angle.
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
12.2.4
Terrain
Storm data can be displayed on the Map page 2000 NM zoom scale, but
the data only goes out as far as the StormScope can report (200 NM). The
Weather
500 NM zoom scale will display all lightning data. Scales greater than 500 NM
do not display any additional StormScope data.
Nearest
Music
NOTE: Cell mode uses a clustering program to identify clusters of electrical
Utilities
activity that indicate cells. Cell mode is most useful during periods of heavy
storm activity. Displaying cell data during these periods frees the user
System
from sifting through a screen full of discharge points and helps to better
determine where the storm cells are located.
Messages
Symbols
Appendix
12-30
Index
Changing the StormScope
1. While viewing the Weather StormScope page, touch MENU.
2. Touch the 360° or Arc to select the display view.
Figure 12-42 StormScope 360º and Arc Display Views

Changing the Storm Data Display Range

1. While viewing the StormScope page touch the In and Out
keys to display a larger or smaller area.
Garmin GTN 725/750 Pilot's Guide
Display View
®
190-01007-03 Rev. B