Garmin GTN 750 Pilot's Manual page 138

NOTE: The chart for the destination airport or loaded approach will
Foreword
automatically be selected.
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
Airport
FPL
Select
Airport
Direct-To
Proc
Charts
Wpt Info
The following list describes the order in priority in which charts are auto-
Map
loaded in the system when the Chart page is displayed:
1. The most-recently selected chart during the current power cycle, if valid*,
Traffic
2. The airport surface chart for the nearest airport, if on ground and nearest
Terrain airport is found,
3. The approach chart for the approach in the active flight plan, if approach
Weather
exists in the flight plan,
4. The airport surface chart for the last airport in the flight plan, if one exists,
Nearest
5. The airport surface chart for the nearest airport, if nearest airport is found
Music
(same as #2 but aircraft could be in-air),
6. The airport surface chart for the first airport in the database, if found,
Utilities
7. No chart.
System
* "Selected" does not include charts that were auto-selected. A selection
must be made while on the charts page.
Messages
There following actions will invalidate #1:
Symbols
• Changing the approach in the active flight plan
• Changing the on-ground status while not viewing the Charts page
Appendix
7-2
Index
Info Chart Detail
View Info
Select
APR
Detailed
DP
Info
Arrival
Figure 7-1 Charts Functional Diagram
Garmin GTN 725/750 Pilot's Guide
Airport Info
Menu
View
Airport
Wpt
Info
Full Screen
Invert Colors
All
Header
Plan
Profile
Mins
190-01007-03 Rev. B