Intercom Setup - Garmin GTN 750 Pilot's Manual

Pilot's guide
Hide thumbs Also See for GTN 750:
Table of Contents

Advertisement

2.3
Foreword
The GTN 7XX will operate as a control head for remotely connected optional,
Getting
compatible intercom equipment. The Intercom (ICS) System has several
Started
modes of operation that are selected on the display of the GTN 7XX to control
Audio &
communication in the aircraft. Passengers cannot transmit over the active Com
Xpdr Ctrl
radio, even if equipped with a PTT key.
Com/Nav
FPL
Direct-To
Proc
Charts
Selected
Wpt Info
Intercom
Mode
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
2-14
Index

intercom Setup

1. Touch the Intercom window at the top of the display to
display the Intercom Setup page.
Figure 2-17 Intercom Setup
2. Touch the arrow between the intercom recipients to activate
communication between those recipients. The arrow will be
green when communication is active. Touch the arrow again
to deactivate communication. Detailed information is shown
in the Intercom Modes table.
3. Touch the key for a function to the make the desired changes
to their configuration. Then, touch the Back key to return to
the Intercom Setup page.
Garmin GTN 725/750 Pilot's Guide
Touch To Display
Intercom Setup
Touch To Configure
Co-Pilot Volume
And Squelch
Touch To Configure
Pilot Volume And
Squelch
Touch To Configure
Passenger Volume
And Squelch
Touch Source
To Configure
190-01007-03 Rev. B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gtn 725

Table of Contents