Remote Frequency Selection Control; Audio - Garmin GTN 750 Pilot's Manual

3.3.5

Remote Frequency Selection Control

On units configured for remote Com frequency Recall, pressing the remote
recall switch will load the next preset Com frequency into the unit' s Standby
frequency box. The remote recall switch can be pressed multiple times to scroll
the entire preset frequency list through the Standby frequency box (the list will
"wrap" from the bottom of the list back up to the top, skipping any empty preset
positions).
The standby frequency isn't activated until a Com flip-flop switch (either
remote- or bezel-mounted) is pressed. Remote Frequency Selection only
functions on units configured for a remote Com Frequency recall switch.
190-01007-03 Rev. B Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
3-13
Index