System Setup; Fpl; Date/Time - Garmin GTN 750 Pilot's Manual

16.4.1

System Setup

System Setup function allows setting the time convention, Com channel
spacing, crossfilling to a second GTN, and Nearest Airport search filtering.
1. While viewing the System page, touch the Setup key.
Touch Key to
Select CDI Scale
Touch Key to
Set ILS CDI
Capture
Touch Key to
Set Time Offset
Touch Key to
Set Time Format
2. After making the desired selections, touch the Back key to
return to the Setup page.
16.4.1.1

Date/Time

The Date/Time setting provides selection of time format (local or UTC; 12-
or 24-hour). UTC (also called "GMT" or "Zulu") date and time are calculated
directly from the GPS satellites' signals and cannot be changed.
1. While viewing the System Setup page, touch Local Offset to
set the time offset for local time.
2. Use the keypad to select the desired local offset and then
touch Enter.
190-01007-03 Rev. B
Figure 16-13 System Setup Page
Figure 16-14 System Date and Time Setup
Garmin GTN 725/750 Pilot's Guide
Touch Key to Set
Runway Surface Type
Touch Key to Set
Min Runway Length
Touch Key to Set Com
Channel spacing
Touch Key to Enable
Crossfill With Dual Units
Current Selected
Date and Time
Touch To Select
Local Time Offset
Touch To Select
Time Format
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav

FPL

Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
16-15
Index