Easy Timer Recording - Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual

Recording
05
• Approximately two minutes before a
timer recording is set to start, the
recorder will go into timer recording
standby. In timer recording standby you
cannot use some functions.
• The maximum length for timer
recordings made to the HDD is 24 hours.
However, because one title (HDD) is
limited to 12 hours, recordings over
12 hours will be spread over two titles.
Note that there will be a break in the
recording of a few seconds between
titles.
• When a scheduled recording finishes,
this unit's power is not turned off if the
power for the Flat Panel TV is on. If you
want this unit's power to turn off after a
timer recording finishes, set the HDMI
Control to Off (page 120).

Easy Timer Recording

As the name suggests, Easy Timer
Recording makes setting up a timer
recording as simple as possible.
HOME
MENU
1 Select 'Timer Recording', then
'Easy Timer' from the Home Menu.
CHANNEL
2 Set the TV channel to record.
Easy Timer Recording
AM
8:00 9:00
1/01
1/02
1/03
1/01
MON
7ch
CHANNEL +/-
REC MODE
3 Set the recording quality.
• DVD recording: The AUTO option
automatically sets the best recording
quality for the space available on the disc
loaded at the time of recording.
• HDD recording: The AUTO option
automatically sets the best recording
quality that would fit on to a blank DVD
disc.
40
En
PM
10:00 11:00 12:00 1:00 2:00
9:30 – ––:––
AM
REC MODE HDD/DVD
SP HDD
HDD DVD
4 Select the HDD or DVD for
recording.
5 Move the cursor to the
recording start date and time on the grid.
• You can move the cursor forward or back
an hour at a time using the  and 
buttons.
Current time
Easy Timer Recording
AM
8:00 9:00 10:00
1/01
1/02
1/03
1/01 11:45
MON
Each row of the grid is one day (you can set
the timer recording for up to a month in
advance). Each column is a 15 minute
interval.
The darker area represents time that has
already passed and can't therefore be
selected. The lighter area is time that's
available.
6 Set the start time.
ENTER
The start date and time is displayed in the
middle of the screen.
• You can go back and reset the start time
if you need to by pressing RETURN.
7 Move the cursor to the
recording end time on the grid.
Recording start time
Easy Timer Recording
AM PM
11:00 12:00 1:00
1/01
1/02
1/03
1/01 11:45
MON
Recording start time
PM
11:00 12:00 1:00 2:00
– ––:––
AM
Recording end time
2:00 3:00 4:00 5:00
– 1:45
AM PM