Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual page 43

Recording
3 Enter the timer recording settings.
Use the / buttons to select a field; use
the / buttons to change the value.
• CH – Choose a channel (2 to 69 for
antenna channels; 1 to 125 for cable,
excluding skip channels), or one of the
external inputs from which to record.
• Date – Choose a date up to one month in
advance, or select a daily or weekly
programme.
• Start – Set the recording start time.
• Stop – Set the recording end time
(maximum length of a timer recording is
24 hours).
• Extend – Extend the end time of the
timer recording (select Off, 30, 60, 90 or
120 mins).
4 If you want to change the recording
mode, recording destination, etc., select
'Set Detailed'.
In this area you can set:
Record to – Select HDD for hard disk
recording or DVD for DVD recording. Select
HDD for Auto Replace Recording (daily or
weekly timer recording only).
Recording Mode – Select XP, SP, LP, EP,
SLP or SEP, (See Setting the picture quality/
recording time on page 37). If Manual
Recording is on, then you can also select the
LPCM setting, XP+ or MN (press ENTER
then use the / buttons to select the
level).
Auto Replace Rec. – Automatically erases
the previous daily or weekly recording when
the next one is recorded.
Genre – Select a record genre (for HDD
recording only).
Dual Mono Recording – Select which
channel of a dual mono broadcast to record
(necessary if recording to a Video mode DVD
or to the HDD with the HDD Recording
Format set to Video Mode On).
HDD Recording Format – Select Video
Mode On or Video Mode Off depending on
whether you need high-speed copying to
Video mode DVD capability or not.
5 After entering all the timer recording
information, highlight 'Store
Programme' and press ENTER.
The timer recording list screen is displayed
again. The timer programme you just input
appears in the list. The rightmost column
shows various timer recording status
messages:
• OK – Can be recorded.
• Time Over – Not enough space on the
HDD (the recording won't finish).
• Over 12h – Recording time of over 12
hours set (when recording to the HDD
the recording will be split into two titles).
• Overlap – Two timer programmes
partially or completely overlap. The one
starting earlier will take priority.
• Until ... (e.g., Until 8/13) – For a regular
recording, the last programme that
could be recorded is shown.
• Data Over –Can't record because the
disc management area of the disc is full.
• Cancel Once – A regular timer
programme is set to skip.
• Can't Rec – Not possible to record.
• Title Over – Can't record because there
is already the maximum number of titles
on the disc (HDD: 999; DVD: 99).
• Recording – The programme is currently
recording.
• Standby – The recorder is in timer
recording standby.
• nothing displayed – Another timer
recording or copying is in progress.
6 To exit the timer recording screen,
press HOME MENU.
Tip
• To enter a title name for the timer
recording in advance, select Set Title
Name and follow the on-screen display.
05
43
En