Recording
05
• What happens when two or more timer
programmes overlap?
Basically, the programme with the
earlier recording start time has priority.
However, the recorder will start
recording the programme with the later
start time after the earlier programme is
finished. If schedule to record two
programmes have the same times (but
different channels, for example), then
only one of the two programmes will be
recorded. In this event you should cancel
the scheduled recording of the lesser
important programme.
If one of the overlapping programmes is
a regular timer programme, you may
choose 'Cancel Once' in order to avoid
having it overlap with a separately
scheduled programme (see Skipping a
regular timer programme on page 44).
Simultaneous recording and
playback (Chase Play)
HDD
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is 'chasing' the
recording).
In fact, you're not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you're recording to the HDD) by
selecting it from the Disc Navigator screen
(see Using the Disc Navigator with recordable
discs and the HDD on page 56).
Chase Play is not possible when DV is the
recording input.
PLAY
•
Press during recording to
start playback from the beginning of the
current recording
Note
1 You can't start playback immediately after recording starts. Simultaneous playback and recording doesn't work
46
while copying or backing up.
En
1
.
DISC
NAVIGATOR
•
Press during recording to select
another title to play.
You can use all the usual playback controls,
such as pause, slow-motion play, scan and
skip.
• To stop playback, press STOP
(recording will continue).
• To stop recording, press
(playback will continue).
Recording from an external
component
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
You can record from an external component,
such as a camcorder or VCR, connected to
one of the recorder's external inputs.
1
Make sure that the component you
want to record from is connected
properly to the HDD/DVD recorder.
See Chapter 2 (page 15) for connection
options.
INPUT SELECT
2
Press repeatedly to select one of
the external inputs to record from.
The current input is shown on-screen and in
the front panel display:
• L1 – INPUT 1/AUTO START REC
• L2 – INPUT 2 (front panel)
• L3 – INPUT 3
Check that the Audio In settings for
External Audio and Dual Mono Recording
are as you want them (see Audio In on
page 114).
• If the aspect ratio is distorted (squashed
or stretched), adjust on the source
component or your TV before recording.
STOP REC