Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual page 115

The Initial Setup menu
Setting Options
DV Input Stereo 1 •
Stereo 2
Mix
Audio Out
Dolby Digital Dolby
Out Digital •
Dolby Digital
 PCM
DTS Out On •
Off
96 kHz 
96 kHz PCM Out
48 kHz •
96 kHz
MPEG Out MPEG
MPEG 
PCM •
Audio DRC On
Off •
Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby
Digital.
Language
OSD English •
Language
Français
Explanation
Select to use the 'live' audio track (recorded during the video
shoot) from a camcorder that supports two stereo audio
tracks.
Select to use the overdubbed audio track from a camcorder
that supports two stereo audio tracks.
Select one of the three settings to use a mix of the two stereo
audio tracks.
Output a Dolby Digital signal when a Dolby Digital source is
being played.
Convert Dolby Digital sources to Linear PCM output. Use if
your connected equipment doesn't have a Dolby Digital
decoder.
Output a DTS signal when a DTS source is being played.
Switch off the digital output when a DTS source is being
played. Use when your connected equipment doesn't have a
DTS decoder. In this case, use the analog audio outputs.
Convert 96 kHz digital audio sources to 48 kHz output. Use if
your connected equipment doesn't support 96 kHz sampling
rate.
Output 96 kHz digital audio when a 96 kHz source is being
played.
Output an MPEG audio signal when a source using MPEG
audio is being played.
Convert sources with MPEG audio to Linear PCM output. Use
if your connected equipment doesn't have an MPEG audio
decoder.
Switches on Audio DRC (Dynamic Range Control). Use when
listening to Dolby Digital material at low volume.
Switches off Audio DRC.
Sets the language of the on-screen displays to English.
Sets the language of the on-screen displays to French.
16
115
En