Easy Timer Recording - Pioneer DVR-320 Operating Instructions Manual

Dvd recorder

Hide thumbs Also See for DVR-320:

Operating instructions manual (101 pages)

Operating instructions manual (108 pages)

Operating instructions manual (101 pages)

Table Of Contents

Table of Contents

Recording

Important

• A timer recording can't be set if:

– Auto Start Recording is in progress.

– There are already 32 timer programs waiting to be

recorded.

• Timer recording will not start if:

– The recorder is already recording.

– A disc is being initialized, finalized or unfinalized.

• Except when finalizing Video mode discs, timer

recording will start when the operation preventing

timer recording has finished.

• If a recordable DVD that doesn't support

simultaneous playback and recording (see

Simultaneous recording and playback on page 50) is

playing when a timer recording is due to start,

playback will automatically stop to allow the

recording to start.

• The timer indicator (

) lights in the front panel

display when the timer is active. If the indicator is

blinking it means that there is no disc loaded, or the

disc loaded is not recordable.

• Timer recordings have higher priority than the Auto

Start Recording function (see Automatic recording

from a satellite tuner on page 51). A timer recording

will interrupt an Auto Start Recording. (Auto Start

Recording will resume after the timer recording has

finished.)

• Approximately two minutes before a timer recording

is set to start, the recorder will go into timer recording

standby (assuming that a recordable disc is loaded).

In timer recording standby you cannot use some

functions.