Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual page 54

Playback
06
During playback, enter a title
number then press ENTER to
skip directly to that title.
Press CLEAR to clear a number
entry and start again.
ENTER
(Commercial back/skip) Each
CM BACK CM SKIP
press skips backward/forward
progressively up to a maximum
of two hours in either direction.
While paused, press and hold
to start slow-motion playback.
Press repeatedly to change the
playback speed.
While paused, press to advance
a single frame in either
direction.
Playing Audio CDs and WMA/MP3/
MPEG-4 AAC
The table below shows the basic playback
controls for Audio CDs
1
MPEG-4 AAC
Press to start playback.
PLAY
Press to stop playback.
STOP
Pauses playback, or restarts
PAUSE
playback when paused.
Press to start scanning. Press
again to increase the scanning
speed. (There are two scan
speeds; the current scan speed
is shown on-screen.)
Press to skip to previous/next
PREV NEXT
track.
Note
1 The MPEG-4 AAC files can be played or copied only with the DVR-660H-K.
2 If you want to play a DTS Audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with
a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected
using the AUDIO button (see Switching audio channels on page 61).
3 When playing in PBC mode, some playback features, such as search, repeat and programme play are not
available. You can play a PBC Video CD in non-PBC mode by starting playback using the Disc Navigator (see
54
Using the Disc Navigator with playback-only discs on page 57).
En
1
discs
2
, and WMA/MP3/
files.
Playing Video CDs
The table below shows the basic playback
controls for Video CDs.
Some discs feature Playback Control (PBC
for short) menus. These discs show PBC in
the display when you load them and display
a menu on-screen from where you can select
3
what to watch.
Press to start playback.
PLAY
If RESUME is displayed on-
screen, playback starts from the
place last stopped.
Press to stop playback.
STOP
You can resume playback from
the same point by pressing
 PLAY. (Press
 STOP again to cancel the
resume function.)
Pauses playback, or restarts
PAUSE
playback when paused.
Press to start scanning. Press
repeatedly to increase the
scanning speed.
Press to skip to previous/next
PREV NEXT
track.
When a PBC menu is displayed,
press to display the previous/
next page. (During playback
you can also use the front panel
CH +/– buttons.)
During playback, enter a track
number then press ENTER to
skip directly to that track.
Press CLEAR to clear a number
entry and start again.
While a PBC menu screen is
ENTER
displayed, use to select
numbered menu items.