Switching Audio Channels; Switching Camera Angles; On-Screen - Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual

Playback
Check the disc packaging for details of the
soundtrack options.
AUDIO
• Change the audio soundtrack.
The current audio language is shown on-
screen and in the front panel display.
• The sound may drop out for a few
seconds when switching soundtracks.
• Some discs feature both Dolby Digital
and DTS soundtracks. There is no analog
audio output when DTS is selected. To
listen to the DTS soundtrack, connect
this recorder to a DTS decoder or AV
amp/receiver with built-in DTS decoder
via the digital output. See Connecting to
an AV amplifier/receiver on page 21 for
connection details.

Switching audio channels

DVD (VR) DVD-RAM HDD
1
For HDD and VR mode content that has
both a main and a SAP (Secondary Audio
Programme) audio channels, you can switch
between main (L), SAP (R), or both (L+R).
When playing Video CDs and Audio CDs you
can switch between stereo, just the left
channel or just the right channel.
AUDIO
• Press repeatedly to display/
switch the audio channel.
The audio channel(s) currently playing are
indicated on-screen.
HDD DVD (VR) DVD-RAM
L+R – Both channels (default)
L – Left/main channel only
R – Right/SAP channel only
Note
1 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 118).
2 When playing a dual mono recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via
the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby Digital  PCM (see
Dolby Digital Out on page 115) or listen via the analog outputs if you need to switch the audio channel.
WMA/MP3
CD Video CD
MPEG-4 AAC
2
WMA/MP3
CD Video CD
MPEG-4 AAC
Stereo – Stereo (default)
1/L – Left channel only
2/R – Right channel only

Switching camera angles

DVD-Video
Some DVD-Video discs feature scenes shot
from two or more angles — check the disc
box for details: it should be marked with a
icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the
same icon appears on screen to let you know
that other angles are available (this can be
switched off if you prefer — see Angle
Indicator on page 119).
ANGLE
• Switch the camera angle.
• The angle number is displayed on-
screen.
• If the disc was paused, playback starts
again with the new angle.
Displaying disc information

on-screen

You can display various on-screen
information about the disc loaded or the
HDD.
DISPLAY
• Display/change the on-screen
information.
• Press once to show the HDD and
removable disc (DVD, etc.) activity
together. Press again to show the status
of just the currently selected playback/
recording device (HDD or removable
disc).
• To hide the information display, press
DISPLAY repeatedly until it disappears.
06
61
En