Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual page 45

Recording
Cancelling or extending the timer
REC
1 Press and hold for three seconds
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been cancelled.
REC
2 Press repeatedly to extend
recording in 30 minute blocks.
Programming a new end time
You can edit the end time of a timer
recording you have previously set.
HOME
MENU
1 Select 'Timer Recording' then
'Timer Recording' from the Home Menu.
2 Highlight the timer recording
you want to change.
Press  then select 'Modify'
ENTER
3
from the command menu panel.
Alternatively, press ENTER.
The Timer Programme Set screen appears,
from which you can edit the settings.
ENTER
4 Edit the end time as necessary.
You can also edit the Extend time parameter.
ENTER
5 Select 'Store Programme'.
HOME
MENU
6 Press to exit the Timer Recording
screen.
Stopping a timer recording
STOP REC
1 Press during a timer recording.
ENTER
2 Select 'Yes' to confirm.
Preventing use of the recorder
before a timer recording (child
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
STANDBY/ON
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCKED. If any buttons are pressed on the
remote or front panel, LOCKED is briefly
displayed again.
• To unlock the recorder, press and hold
 (Stop) on the front panel (while the
recorder is stopped) for three seconds
until the display shows UNLOCKED.
• Even if you make child lock settings, this
unit can still be controlled by the remote
of a connected Flat Panel TV. If you do
not want this unit to be able to be
controlled by another component when
you have set a child lock, turn this unit's
HDMI Control to Off (page 120).
Timer recording FAQ
Frequently Asked Questions
• Even though the timer is set, the recorder
doesn't start recording!
Check that the disc loaded or HDD is
recordable, not locked (see Lock Disc on
page 107), and that there are fewer than
99/999 titles already on the DVD/HDD.
• The recorder won't let me enter a timer
programme! Why not?
You can't enter a timer programme if the
clock isn't set.
05
45
En