Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual page 131

Additional information
Problem
Front panel display
shows 'LOCKED' when
a button is pressed
Can't use One Touch
Copy (HDD to DVD)
Can't use One Touch
Copy (DVD to HDD)
The device connected
to the USB port is not
recognized
File names are not
displayed properly
Title searching in the
Gracenote database is
not possible
(DVR-660H-K/DVR-560H-K
only)
Remedy
• The child lock is on; turn off in order to use the recorder (page 45).
• Make sure that there is a recordable DVD-R/-RW loaded with some
free space for recording and fewer than 99 titles already on the disc.
Also make sure that for a DVD-R/-RW (Video mode) or a DVD+R, the
disc isn't finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some
free space for recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of
remaining recordable titles may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that
there isn't a disc menu on the disc you're trying to use.
• If the title currently playing contains material that is copy-once
protected, One Touch Copy will not work.
• If the currently playing HDD content was recorded in XP+ mode, the
One Touch Copy feature can't be used.
• One Touch Copy can't be used for titles over eight hours long when
copying to DVD+R/+RW (though you can use a DVD+R DL).
• One Touch Copy can't be used for MN1 to MN6, SEP , SLP or EP titles
when copying to DVD+R/+RW.
• One Touch Copy doesn't work if the recorder is already recording to DVD.
• Make sure that there is space available on the HDD and that there
are fewer than 999 titles on the HDD.
• One Touch Copy doesn't work if the recorder is already recording to
the HDD.
• Check that the device is compatible with this recorder (page 24).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Try switching this recorder into standby mode and then back on.
• Try using the Restart USB Device option from the Initial Setup menu
(page 122).
• If several USB devices (camera, USB memory, card reader, etc.) are
connected at the same time, it's possible that only the first device
connected to this recorder will be recognized.
• Files names that do not conform to the ISO8859-1 standard may not
display correctly on this unit.
• Title searching is not possible when the HDD Sleep Mode is set
(page 122).
17
131
En