Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual page 112

The Video Adjust menu
15
ENTER
3 Select the picture quality
setting you want to adjust.
Memory1
Prog. Motion
PureCinma
YNR
BNR
MNR
Sharpness
Detail
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive. (Prog. Motion is
ineffective when PureCinema is On.)
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually set
to Auto 1 but try switching to Auto 2,
On or Off if the picture appears
unnatural.
• YNR – Adjusts the amount of noise
reduction (NR) applied to the
Y (brightness) component.
• BNR – Adjusts the amount of noise
reduction (NR) applied to the block noise
(artefacts visible in areas of flat colour,
caused by MPEG compression).
• MNR – Adjusts the amount of noise
reduction (NR) applied to the mosquito
noise (artefacts visible around the edges
of an image, caused by MPEG
compression).
• Sharpness – Adjusts the sharpness of
the high-frequency (detailed) elements
in the picture. Sharpness is ineffective
for HDMI output.
• Detail – Adjusts how sharp edges
appear.
• White Level – Adjusts the intensity of
white. White Level is ineffective for HDMI
output.
• Black Level – Adjusts the intensity of
black. Black Level is ineffective for HDMI
112
output.
En
Motion Still
Auto1
Off Max
Max
Off
Off Max
Fine
Soft
Fine
Soft
• Black Setup – Corrects the standard
reference black level. Black Setup is
ineffective for HDMI output.
• Gamma Correction – Adjusts the
brightness of darker images. Gamma
Correction is ineffective for HDMI
output.
• Hue – Adjusts overall balance between
red and green. Hue is ineffective for
HDMI output.
• Chroma Level – Adjusts how rich the
colours appear. Chroma Level is
ineffective for HDMI output.
ENTER
4 Adjust the currently selected
setting.
HOME
MENU
5 Press to exit.
Tip
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.