WDS Bridge Mode
In WDS Bridge Mode, the AP/CPE can wirelessly connect different LANs by configuring the MAC address and security
settings of each AP/CPE device. Use this modewhen two wired LANs located a small distance apart want to communicate
with each other . The best solution is to use the AP/CPE to wirelessly connect two wired LANs, as shown in the following
diagram.
WDSBridge Mode can establish up to four WDSlinks, creating a star-like network.
Note: WDSBridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency
channel. More Access Points connected together maylower throughput.
AP
WDS Bridge
Client
Computer
AP
WDS Bridge-
AP
WDS Bridge-
30
Client
Computer
Client
Computer