Table of Contents
Advertisement
11a/b/g Wireless Multi-Client Bridge/AP/WDS
3 Client Bridge Mode – Web Configuration
3.1 Logging In
To configure the Bridge through the web-browser, enter the IP address of the Bridge
(default: 192.168.1.1) into the address bar of the web-browser and press Enter.
Make sure that the Bridge and your computers are configured on the same subnet.
Refer to Chapter 2 in order to configure the IP address of your computer.
After connecting to the IP address, the web-browser will display the login page.
Specify the User Name and Password. The device does not have a User Name and
password configured by default, therefore please leave the password field blank and
then click on the Login button.
After logging in you will graphical user interface
(GUI) of the bridge. The navigation drop-down
menu on left is divided into six main sections:
1.
System: This menu includes the administrator
settings, advanced wireless settings such as
wireless MAC clone and RTS/fragmentation
threshold. Also included are other system related
settings such as firmware upgrade, reset to
factory
defaults,
configuration.
Wireless: This menu includes the settings such
2.
as network type (infrastructure/ad-hoc), data rate,
and security.
LAN: This menu includes the configuration of the LAN port and settings for the LAN
3.
IP, subnet mask, default gateway and DHCP client.
4.
Logs: This menu displays a log of the critical and informational events that are
triggered on the device.
Statistics: This menu displays the wired and wireless interface statistics.
5.
6.
Help: This menu describes the features of the device and the parameters for each
setting.
and
system
date/time
Version 1.0
11
Advertisement
Table of Contents
