Installing Additional Memory; Introduction; Required Tools; Memory Configuration Guidelines - HP D5970A - NetServer - LCII Installation Manual

5 Installing Additional Memory

Introduction

This chapter provides the instructions for adding memory to the HP NetServer
LXr 8500, which includes guidelines for:
Removing and installing a memory board (also adding a memory board)
Installing or removing DIMMs on the memory board in any configuration
DIMM Connectors

Required Tools

The following tools are required for removal and installation of the memory
boards and DIMMs:
An anti-static service kit (3M 8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.

Memory Configuration Guidelines

These guidelines should be followed when installing additional DIMMs or a
second memory board in the HP NetServer LXr 8500.
DIMMs
Figure 5-1. Memory Board and DIMMs
Memory Board
49