Hw Sys Info (Hardware System Information) Menu; Fw Info (Firmware Information) Menu - HP D5970A - NetServer - LCII Installation Manual

Chapter 2

HW Sys Info (Hardware System Information) Menu

The HW Sys Info menu displays the HP NetServer's configuration information for
viewing only. The information provided includes the number, speed, and type of
CPUs, cache information, and the amount of RAM on each memory board.
1. To select HW Sys Info from the Main Menu, press the Enter button.
A display similar to the one shown below appears on the HP NetServers
front panel display.
**HW Sys Info***
No. Of CPUs=x
2. Use the front panel's down-arrow button to scroll down through the rest of
the information.
A full window of the display would appear as shown below, but the actual
display is limited to two viewing lines at time.
**HW Sys Info***
No. Of CPUs=x
CPU speed 500MHz
CPU type PIII Xeon
LFT CPU1 stepping xx
LFT CPU2 stepping xx
LFT CPU3 stepping xx
LFT CPU4 stepping xx
RFT CPU1 stepping xx
RFT CPU2 stepping x
RFT CPU3 stepping xx
RFT CPU4 stepping xx
L2 Cache xxxx KB
Mem slot1 xxxxMB LFT MEM BD
Mem slot2 xxxxMB RGT MEM BD
3. Press the front panel's Escape button to return to the Main Menu.

FW Info (Firmware Information) Menu

The FW Info menu displays the firmware versions of all firmware components in
the HP NetServer, for viewing only. Table 2-6 provides some of the abbreviations
used in the FW Info menu:
Controls, Indicators, and Ports
(x = 1 to 8 CPUs)
21