Fw Info (Firmware Information) Menu; System Info Menu - HP D7171A - NetServer - LPr Installation Manual

Chapter 2
10 :27 :15
Proc. 2 FRB3
Failure
4. Use the arrow keys to scroll through the entire log.
5. To return to the Event Log menu, press Escape.
6. Press Escape again to return to the Main Menu.

FW Info (Firmware Information) Menu

The FW Info menu displays the versions of all firmware components in the
system.
1. Select FW Info from the Main Menu.
A display similar to the one shown below appears on the NetServer's front
panel display.
**FW Info***
2. Use the arrow buttons to scroll down through the rest of the information.
NOTE If the system cannot detect one of the components in this menu
-- for example, the TopTools Remote Control card (RCC) --
the word "absent" appears next to the component in place of a
version number.
3. Press Escape to return to the Main Menu.

System Info Menu

The System Info menu displays the HP NetServer's configuration information.
Information includes the number, speed, and type of CPUs, cache information,
and the amount of RAM on each memory board.
1. Select System Info from the Main Menu.
A display similar to this appears on the HP NetServer's status screen.
**System Info***
No. Of CPUs=x
Controls, Indicators, and Ports
15