Configuring Access Point Groups; Managed Access Point List - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

Most networks do not need access point groups. Access point groups are useful if completely
separate networks share a single LAN. For example, a shopping mall might need access point
groups if several businesses share a LAN, but each business has its own network.

Managed Access Point List

On the Configuration tab, select Access Point Groups to display the Managed Access Point List:
Figure 6-1
This page shows details of each controlled access point. You can edit the connection settings for
specific access points. Each access point entry shows:
• IP: The IP address of the access point.
• Model: The access point model.
• Name: The name you specify for the access point.
• Group Name: The name you specify for the access point group.
• Synchronized: Shows whether or not the access point is synchronized with the Wireless
Management System.
• Status: The access point connectivity status.
To change the settings of a access point, select the access point and click Edit button. You can use

Configuring Access Point Groups

v1.0, March 2010
Chapter 6
6-1