Remote Management; Remote Console For The Wireless Management System - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Remote Management

You can enable SSH or Telnet in order to remotely log in to the controller. or access point
groups.

Remote Console for the Wireless Management System

From the Maintenance tab select Remote Management > System > Remote Console:
Figure 7-8
1. Select the radio button for SSH or Telnet:
• Secure Shell (SSH): If set to Enable, the Wireless Management System will allow remote
access by using Secure Shell.
• Telnet: If set to Enable, the Wireless Management System will allow remote access by
using Telnet.
2. Click Apply to save your settings.
Maintenance
v1.0, March 2010
7-7