Advanced Remote Console For Access Point Groups; Session Timeout - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Advanced Remote Console for Access Point Groups

Enable SSH or Telnet to log in to managed access points. These settings are only applied on
managed ProSafe access points which support SSH and telnet.
Figure 7-9
1. Use the Group tab to select the settings for a specified group of access points. The access
points that have not been assigned any group share the settings of group 1.
• Secure Shell (SSH): If set to Enable, the access points will allow remote access via
Secure Shell.
• Telnet: If set to Enable, the access points will allow remote access using Telnet.
2. Click Apply to save the selected settings

Session Timeout

If a session times out, the user is redirected to the login window for password verification.
Figure 7-10
To specify the length of the session timeout for the Wireless Management System.
1. In the Timeout (minutes) field, specify number of minutes before an active http/https login
session expires.
7-8
v1.0, March 2010
Maintenance