Editing A Security Profile - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual
• SSID: The SSID associated with this profile.
• VLAN: The VLAN ID associated with this security profile.
• Security: The security standard, such as WPA-PSK, associated with the profile.
3. Select the Enable checkbox to enable (or disable) the corresponding profile.
4. To change the settings of a security profile, select the profile and click the Edit button.

Editing a Security Profile

This lets you change the Security Profile settings of the profile that you selected on the Profile
Settings page.
Figure 4-2
• Name: A unique name for the Security Profile, up to 32 alphanumeric characters. Use
meaningful names instead of the default names. The default profile names are Profile1,
Profile2, and so on.
• Wireless Network Name (SSID): The name of the wireless network associated with this
profile.
• Broadcast Wireless Network Name (SSID): Enabled by default. If set to Yes, the SSID is
broadcast. If you disable broadcast of the SSID, only devices that have the correct SSID can
connect to the access point.
• Network Authentication: The authentication type to be used. See
• Data Encryption: The data encryption type to be used. The options available for data
encryption depend on the Network Authentication settings. See
Security Configuration
v1.0, March 2010
Table 4-1 on page
Table 4-1 on page 4-3.
4-3.
4-2