Access Point Groups - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual

Access Point Groups

This page displays details of each access point belonging to a configured group managed by the
Wireless Management System. This page also allows you to rename a group and add or delete
other managed access points from the group.
Figure 6-3
• To change group members, click the Edit button.
• To add access points to the group, select the access points. They will be synchronized to the
settings you specified for the group.
• Click the Apply so that your changes take effect.
Each access point shows the following information:
• IP Address: The IP address of the access point.
• Model: The access point model.
• Name: The name you specify for the access point.
• Synchronized: The access point configuration synchronization status.
• Status: The access point connectivity status.
6-4
v1.0, March 2010
Configuring Access Point Groups