Table of Contents
Advertisement
Chapter 7 Environment setting
Settings are performed as for the basic contents required to use this machine. These settings
include functions for checking which are not used in normal operation.
1. Environment parameter setting
Contents of each environment parameter can be changed.
1. Set the power supply switch to ON and press the start switch to detect the home position.
2. The mode is set to be the setting mode by pressing the "SELECT" key w with the "ENTER"
key q pressed.
* Environment parameter Nos. are displayed in the program No. display window e to illuminate (a dot at lower and right side
distinguishes the environment parameter No. from the parameter No. [Chapter 3. Setting]) and the contents of environment param-
eters is displayed in the contents display window r to blink. (Display and contents are displayed alternately.)
3. Press ∆∇ key to change the environment parameter No.
4. Press
key to change the contents. Return to step 3 if you have other environment
parameters to change.
5. Press the "ENTER" key q to memorize the changed contents.
76
w
q
BAS-6150
e
r
1457S
Advertisement
Table of Contents
