Table of Contents
Advertisement
Chapter 3 Settings
1-4. Counter operation
1-4-1. Setting for the lower thread
The No. of bobbin counter decreases by one when sewing for one program is completed. When
the counter shows 0, a buzzer sounds five times and the lower thread setting mode appears
(below 3). The maximum setting No. is 999. The lower thread volume sensor (option) can be
used. No setting can be performed for the lower thread counter when the lower thread volume
sensor is used. When the lower thread volume sensor detects "no thread", a sign appears
according to the case.
"BBN.B"(
): No bobbin thread on both the right & left.
"BBN.L"(
): No bobbin thread on the left.
"BBN.R":(
): No bobbin thread on the right.
(The previous value will be displayed when you press the "RESET" key y.)
1. Keep pressing the "SELECT" key w till LED q in [COUNTER] is lit.
2. Press the "ENTER" key t .
The mode is set to the counter setting mode by pressing the "ENTER" key t and the previous setting value is displayed to blink.
3. Press
key to change the lower thread counter No.
A number is blinking in the contents display window r while the lower thread counter is in setting.
* When the setting set at 000, the lower thread counter is not used.
4. Press the "ENTER" key t to set the number.
The number in the contents display window r is changed to blink..
1-4-2. Clearance of the production counter
Reset the number of the production counter to 0.
1. Keep pressing the "SELECT" key w till LED q in [COUNTER] is lit.
2. The production counter is displayed in the program No. display window e and the contents
display window r while the "RESET" key y is pressed.
3. The production counter is set to 0 by pressing the "SELECT" key w while the production
counter is displayed.
4. The display is returned to the lower thread counter display by releasing the "RESET"key y.
50
y
q
w
t
BAS-6150
e
r
1457S
Advertisement
Table of Contents
