Table of Contents
Advertisement
Chapter 1 Machine Preparation
1. Specifications
Model
Head
Sewing speed
Welting
Standard pitch
Stitch
Condense
length Back tack
V.N. back
pitch
tack
Minimum
Seam
length
Maximum
Program number
Cycle program number
Lower thread counter
Sensor check function
Needle gauge
Needle to be used
Rotary hook
Power
Air pressure/air consumption
Weight
Dimensions
10
118-U73 (the machine with double needles and center knife)
(3000, 2800, 2500, 2200, 2000, 1800, 1500, 1200, 1000, 800, 500, 200 rpm)
Parallel double welting, parallel single welting (with flap, without flap)
Standard 2.4 mm (1.8 - 3.4mm)
30mm (center knife ON), 15mm (center knife OFF)
220mm (standard), 250mm (option)
5 (4 prgrams/1 cycle, stacker movable in the middle)
0 - 999 (disable when remaining amount detection device in use)
Display of conditions of sensors, switches, etc
8, 10, 12, 14, 16, 18, 20 mm (Standard: 12mm)
3 phase 200V,220V,380V,400V,415V, 600VA
W1,010mm x D1,350mm x H1,200mm
BAS-6150
151-6150
Maximum 3000rpm
Standard 1mm (0.4 - 2.0mm)
Standard 1mm (0.8 - 3.4mm)
10 (enable to copy)
Mtx190#16 (#14 - #18)
Horizontal double hook
0.49Mpa, 10l /min
225kg
Advertisement
Table of Contents
