Table of Contents
Advertisement
3-7. Air pressure setting
When adjustment has to be done with the power switch and air pressure on, pay enough attention to
safety.
Detach the air tube of air source and set the pointer of the pressure gauge to [0] for inspection,
adjustment, and repair of devices using air.
q
e
r
u
t
y
CAUTION
1. Joint rubber hose q to union e of air unit
w.
w
1446S
2. Turn handle r while pulling up it to set air
pressure to 0.49 Mpa.
3. When water is noticed in bottle t, drain
water by pressing the button of the drain
cock y.
(Note) When bulb u is opened, pay due attention to
1447S
BAS-6150
Chapter 1 Machine Preparation
movement of the stacker bar.
17
Advertisement
Table of Contents
